Go to FrenchFrançois Vivier Naval Architect
Stock plans: tenders and rowing boats


Morbic (8 and 10)
Morbic 8Hull/Waterline length: 2.30/2.15 m Breadth: 1.20 m Light weight: 35 kg EU category:  not required
Morbic 10Hull/Waterline length:2.77/2.58 mBreadth:1.32 mLight weight:52 kgEU category:D

Grand-MorbicMorbic 10 sailAlbum photosFiche technique

Morbic was designed with the aim:
  • to be a graceful and classic tender, able to replace standard inflatables, with far better rowing ability avoiding the use of an outboard motor.
  • to be practical for today use, light, easy to haul on strand (flat bottom, two aft skegs, a breast hook acting as a handle) and as far as possible stowable of the cabin top.
  • and to be easy to build, in particular for a first time builder.
I first designed a small version, which is made with standards 2.5 m or 8' plywood panels.  The first one was built by Marion Le Pache, who has already built some years ago a beautiful Aber. You mau visit her web site on Morbic construction.
Then I was asked for a larger version, built with 3.1 m of 10' panels. A sail option was also required and is now available on Morbic 10. A very attractive alternative to the Optimist.
Both sizes are very similar. There is two rowing positions, according to crew. Morbic 10 is fitted with buoyancy tanks as required by EC rules. In both cases, it is possible to fit an outboard if you really need it!
It is possible to adapt size to the available room on-board your "main boat". So, I am prepared to print polyester patterns with easily changed dimensions. Then, it is possible to get a tender from 2 to 3.2 m about. See bellow price for this custom option and get in touch to check feasibility.

Icarai is marketing the kit and ready to sail Morbic for all versions.

Product Version Ref
EU (VAT incl.)
Other countries
Availability in English
Study plan All
MOR-E
15 ¤  15 ¤
About 15 days
Building plantender 8'MO8-DA80 ¤ 70 ¤About 1 month
Building plantender 10'MO10-DA80 ¤70 ¤About 1 month
Building planwith sail 10'MO10-DV100 ¤85 ¤About 1 month
Full size patterntender 8'MO8-TC130 ¤108 ¤Available
Full size patterntender 10' (tender or sail)MO10-TC150 ¤125 ¤Available
Pattern custom sizeAll
100 ¤85 ¤Please ask for delivery time 
Attention : full size polyester patterns or kit are necessary to build this boat
Plan content - Ordering a planOrder form
Portzic
Hull/Waterline length: 2.95/2.66 m Breadth: 1.40 m Light weight: 140 kg Voilure :
OptionEU category:  D

PortzicAlbum photosFiche technique

This plan was asked by an English yachtman willing a suitable tender to go on-board his traditional boat. He had remarked old tenders in the region of Brest and wanted a similar boat.
Portzic is strip planked on laminated or steam bent frames. She is a stable tender, with a hard chine and full ends. Please be conscious she is not so easy to plank! Two units are already built.
The boat may be built using either full scale patterns or a kit.

Icarai is marketing the kit.

Product Version Ref
EU (VAT incl.)
Other countries
Availability in English
Study plan Strip
POR-E
15 ¤  15 ¤
Please ask for delivery time 
Building planStripPOR-D90 ¤ 75 ¤Please ask for delivery time 
Full size patternStripPOR-TL120 ¤100 ¤Available
Attention : full size polyester patterns or kit are necessary to build this boat
Plan content - Ordering a planOrder form
Aulne
Hull/Waterline length: 4.12/3.93 m Breadth: 1.38 m Light weight: 70 kg Voilure :
noEU category:  D

AulneAlbum photos

Aulne was designed for rowing at sea or in lakes or river, allowing long trips with one or two rowers and the ability to carry a picnic basket or even a tent to spend a night ashore. One seat is movable, in order to trim the boat properly according to load.
She is clinker built with 4 to 6 mm plywood. So you may give priority to lightness or strength.
Fitted with fixed seats and without outriggers, she offer a very pleasent rowing on long distance, as well as ability to board any beach or strand.
Several units are presently under construction by amateur builders.

Icarai is marketing the kit, as well as the "ready to row" boat.

Product Version Ref
EU (VAT incl.)
Other countries
Availability in English
Study plan clinker AUL-E
15 ¤  15 ¤
Please ask for delivery time 
Building planclinkerAUL-DA120 ¤ 100 ¤Please ask for delivery time 
Full size patternclinkerAUL-TA180 ¤150 ¤Available
Attention : full size polyester patterns or kit are necessary to build this boat
Plan content - Ordering a planOrder form
Elorn
Hull/Waterline length: 4.84/4.40 m Breadth: 1.40 m Light weight: 125 kg Sail area:
OptionEU category: D (rowing)

Elorn à l'échouageAlbum photosFiche technique

Elorn is a sail and oar boat and is described as such here.
As it is a good and seaworthy rowing boat , she may also be built as a rowing boat only.

Icarai is marketing the kit, as well as the "ready to row" boat.

Product Version Ref
EU (VAT incl.)
Other countries
Availability in English
Study plan clinker
ELO-E
15 ¤  15 ¤
Please ask for delivery time  
Building planclinkerELO-D170 ¤ 140 ¤Please ask for delivery time 
Full size patternclinkerELO-TC180 ¤150 ¤Available
Attention : full size polyester patterns or kit are necessary to build this boat
Plan content - Ordering a planOrder form




TopHome